Teradek Bolt 10k Video Transmitter
For a quote on renting this product, please call us at 615-782-2002 or email [email protected]
Description
The small transmitter can be easily attached to a camera while it is handheld or mounted on a stabilizer. SDI and HDMI connections are available on the transmitter, as is an SDI loop output. The panel-like receiver unit can receive an HD or SD video signal from a Teradek Bolt 3000 transmitter up to 10,000′ away.
| Inputs | Transmitter: SDI: 1 x BNC 3G/HD/SD-SDI HDMI: 1 x HDMI type A |
| Outputs | Transmitter: SDI: 1 x BNC loop outReceiver: SDI: 1 x BNC 3G/HD/SD-SDI HDMI: 1 x HDMI type A |
| Other I/O | Transmitter: 1 x USB micro-B (firmware)Receiver: 1 x USB micro-B (video stream output, firmware) |
| Color Sampling | SDI: YCbCr 4:2:2, 10-bit (8-bit with format conversion) HDMI: RGB 4:4:4, 8-bit |
| Transmission Delay | |
| Resolution Support | 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 576p: 50 480p: 59.94 (HDMI only) 576i: 50 480i: 59.94 |
| Frequency Selection | US: 5.27-5.55 GHz, 5.67 GHz US (Non-DFS): 5.19-5.23 GHz, 5.755-5.795 GHz EU/JP: 5.27-5.67 GHz EU/JP (Non-DFS): 5.19-5.23 GHz |
| RF Power | Transmitter: 22 dBm EIRP (with 2 x 5 dBi antennas) Receiver: 17 dBm EIRP (with 1 x 2 dBi antenna) |
| Power Input | Transmitter: 2-pin, 7-28 VDC Receiver: 2-pin, 7-28 VDC |
| Power Consumption | Transmitter: 7.5 W Receiver: 8.5 W (measured at 1080p60) |
| Operating Temperature | 32 to 122°F / 0 to 50°C |
