SkyPanel ‘C’ (Color) versions have the ability to adjust the correlated color temperature anywhere between 2,800 K and 10,000 K, with excellent color rendition over the entire range. Full plus and minus green correction can be achieved with the simple turn of a knob, and in addition to CCT control, vivid color selection and saturation adjustment is also possible.
| Optical System |
Soft LED diffusion panel, 50,000 hr lamp life |
| Beam Angle |
115° |
| Color Adjustment |
White light: 2,800 – 10,000K continuously variable Correlated Color Temperature
Colored light: Full RBG+W Color Gamut with hue and saturation control |
| Color Temperature Tolerance |
+/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
Estimated color shift over time: < 200 hr |
| Dimming |
0-100% Continuous |
| Control |
On-Board Controller, 5-Pin DMX In and Through
EtherCon LAN Network connectivity, USB-A for firmware updates
RDM (Remote Management Device): DMX setup, hour counter and standard RDM commands |
| Mount |
Steel yoke, Junior pin 1-1/8″ (28 mm) |
| Certification |
CE, FCC; GS, cNRTL, CB (pending)
IP 20 |
| Operating Temperature |
-4 to +113ºF (-20 to +45º)C |
| Dimensions |
Illuminated front face only: 25.4 x 11.8″ (64.5 x 30 cm)
Outside dim. excluding Junior pin: 27 x 17 x 5.23 (688 x 433 x 133 mm) |
| Weight |
26.5 lb (12 kg) |
| Voltage Range |
Input: 90-250 VAC, 50/60 Hz
Output: 48 VDC |
| Connections |
Input: powerCON TRUE1 to Edison
Output: 3-Pin XLR, 10 A (pin 1: negative / pin 2: positive)
powerCON TRUE1 (mains power through) |
| Mounting |
Super clamp attachment or SkyPanel PSU rail mount |
| Control |
Onboard On/Off switch |
| Weight |
11 lb (5.0 kg) |
